Dice Tower
PLA3-baffle dice tower for tabletop gaming, 120mm tall.
78.3k faces
Print Preview
AI Prompt Used
“Make a dice tower with 3 internal baffles, 120mm tall”
This model was generated from a single sentence using PrintMakerAI's AI engine. No CAD experience required.
Slicer & Print Specifications
Dimensions
60 × 138 × 119 mm
Material
PLA
Print Time
3h
Filament
55g
Mesh Faces
78.3k
Printing Instructions & Settings
- Layer Height: 0.2mm
- Infill: 10% Lightning
- Supports: None required
Maker Notes:The internal baffles are angled at 45 degrees to print without supports while tumbling the dice effectively.
Remix this with AI
Start from the exact prompt that created this model, tweak the dimensions or details, and keep moving.
Remix this with AI
Share the example or copy the link.
Related Articles
You Might Also Like
Gravity Token Sorter
Pour tokens onto the high corner and they sort themselves. The deck is tilted 8 degrees down-slope and 6 degrees toward a slot that widens from 14 to 30mm, so each token drops into one of four rear bins by diameter, smallest first.
PLA · 4h 30m
Phone Dock
Charging dock with cable routing channel, 35mm deep cradle.
PLA · 1h 45m
Twin-Arch Monitor Riser
80mm monitor lift on two pointed self-supporting arches, printed upright with no supports. Hex cable tunnels in both legs, a 70-degree phone slot with a cable drop, and a headphone hook. At 278mm it sits diagonally on a 256mm bed.
PLA · 9h