80mm monitor lift on two pointed self-supporting arches, printed upright with no supports. Hex cable tunnels in both legs, a 70-degree phone slot with a cable drop, and a headphone hook. At 278mm it sits diagonally on a 256mm bed.
80mm monitor lift on two pointed self-supporting arches, printed upright with no supports. Hex cable tunnels in both legs, a 70-degree phone slot with a cable drop, and a headphone hook. At 278mm it sits diagonally on a 256mm bed.
278 × 110 × 80 mm
“Design a monitor riser on pointed arches that prints upright without supports, with cable routing and a phone slot”
This model was generated from a single sentence using PrintMakerAI's AI engine. No CAD experience required.
Dimensions
278 × 110 × 80 mm
Material
PLA
Print Time
9h
Filament
211g
Mesh Faces
1.2k
Start from the exact prompt that created this model, tweak the dimensions or details, and keep moving.
A practical guide to designing functional 3D-printable parts using AI tools. Covers design constraints, material selection, and print-optimized geometry.
5 min read
Most AI-generated 3D models fail to print. Here's how PrintMakerAI validates geometry at every step to ensure your models are optimized for FDM manufacturing.
4 min read
A palm-sized nested sphere design where an inner ball "floats" within an outer shell. Showcase of precision print-in-place capabilities and engineered clearance calibration.
PLA · 2h 30m
Twelve-sided tapered outer reservoir with a 2.4 mm wall, chamfered rim, pour spout notch, wire pass-through and a sight slot for reading the water level.
PETG · 18h 10m
Soil pot that hangs from the reservoir rim on a flange, with eight wicking holes in the floor, an integrated 8.8 mm tube channel and a slot for a soil-moisture probe.
PETG · 13h 40m